Tag: Twin Turbo

IN THE NEWS: McLaren 540C Coupé Unveiled in Shanghai

April 20, 2015 / moto+match / 0 Comments

McLaren will launch its second model in the new Sports Series, the McLaren 540C Coupé, at the Shanghai Motor Show, 20-29 April 2015. The most attainable McLaren yet, the 540C Coupé joins the recently revealed 570S Coupé in the Sports Series as the brand brings its race derived DNA to a new audience and segment. These introductions bring the number of new McLarens launched in 2015 to four as the brand continues its rapid growth. Globally available and priced from £126,000, the 540C Coupé can be pre-ordered now with deliveries scheduled to being in early 2016.

The 540C Coupé is a pure McLaren, and a pure sports car, sharing its DNA with the models in the Super Series and Ultimate Series, including a light weight carbon fibre chassis and race-derived technologies. It is fitted with a mid-mounted 3.8-litre twin turbocharged V8 engine which has been developed to be responsive and thrilling, even at low engine speeds. As its name suggests, the Sports Series dedicated application of the award-winning McLaren power unit generates 540PS at 7,500 rpm and 540Nm of torque at 3,500-6,500 rpm. With stop-start technology, it offers optimised levels of efficiency and a longer range suited to the typical usage of cars in this segment.

At the heart of the 540C, as with the 570S, is the unique carbon fibre MonoCell II chassis which has been newly designed with a greater focus on day-to-day usability, offering improved ingress to and egress from the cabin, along with class-leading occupant protection and safety. A dry weight of as low as 1,311 kg (2,890lbs) is achieved as a result of this lightweight structure and the use of aluminium body panels. This figure sees the 540C almost 150kg lighter than its closest competitor.

Power is delivered through the rear wheels via a seven-speed seamless shift gearbox (SSG) which, aided by the low weight of the 540C, sees the 0 to 100km/h (62mph) sprint completed in 3.5 seconds, 0 to 200km/h (124mph) in just 10.5 seconds, and on to a top speed of 320km/h (199mph). Given this level of performance, 25.5 mpg on the EU combined cycle and emissions of just 258 g/km are an impressive achievement.

A subtly revised aerodynamic package and a dedicated wheel design mark out the 540C Coupé against the more powerful 570S Coupé. Unique aero blades below the front bumper channel cold, clean air through the lower bodywork and up over the sculpted bonnet, flanked by large LED headlamps. At the rear, the diffuser sits between the twin exhausts which exit below the rear bumper. The aerodynamically-led styling of the Sports Series Coupé includes intricately designed dihedral doors which include the elegant floating door tendon. This design feature channels air along the length of the door into the two integrated air intakes mounted in the rear quarter panel. This creates a clean path for the air to flow along the bodywork with minimal drag, directing air to the flying buttresses at the rear of the cabin which optimise air flow over the rear deck to increase downforce levels and aid engine cooling. An integrated spoiler at the trailing edge of the rear deck provides optimal downforce.

The 540C Coupé is fitted with distinctive new cast alloy wheels, available with silver or stealth finish, 19-inch at the front and 20-inch at the rear. These are fitted with Pirelli P Zero™ tyres as standard, which have been developed specifically for the Sports Series to offer high levels of performance in all conditions, with progressive levels of grip and a focus on comfort. The 540C retains the Formula 1™-derived Brake Steer system, designed to aid cornering through the application of braking force to the inside rear wheel. This enables later braking into corners, and earlier application of power on exit.

The 540C features a newly-developed suspension system ensuring enhanced levels of driver engagement and refinement on both road and track. The system uses front and rear anti-rollbars Formula 1™- style dual wishbones and independent adaptive dampers. The damper tuning has been revised on 540C, over 570S, with more focus on day-to-day road driving. Adaptive dampers offer control over bump and rebound settings using the familiar McLaren ‘Normal’, ‘Sport’ and ‘Track’ handling settings, with the Sports Series having its own unique damper settings. In ‘Normal’ mode, the system provides a refined yet engaging ride, while the ‘Sport’ and ‘Track’ settings allow a greater level of focus and engagement when required. Twin damper valves ensure precise control, while dual wishbone suspension provides optimised levels of ride quality and driver feedback.

The interior of the Sports Series has been created with a focus on space and ergonomics, offering great outward visibility and interior space for occupants and their belongings. Organic curves carried inside from the exterior design bring delicate tension without aggression to ensure the cabin remains a welcoming environment.

Inside the cabin, the 540C Coupé is luxuriously appointed with leather upholstery to the seats, dashboard and lower doors as standard. The ‘floating’ centre console features a seven-inch IRIS touchscreen which controls all elements of the infotainment system. The air conditioning controls are also incorporated, as first seen on the McLaren P1™, minimising switchgear in the cabin. The touchscreen also controls the standard DAB digital radio, as well as satellite navigation, Bluetooth telephony and media streaming, voice activation and the audio media player. The IRIS system also includes the electronic owner’s manual.

The McLaren 540C Coupé is the second model to join the Sports Series, and sits alongside the 570S Coupé. Both models are available to order from the dedicated global McLaren retail network, operating in every major automotive market, in more than 30 countries. Pricing for the 540C Coupé starts from £126,000.

McLAREN 540C TECHNICAL STATISTICS

PERFORMANCE

0-100 km/h (0-62 mph)	3.5 seconds
0-200 km/h (0-124 mph)	10.5 seconds
Top speed	320 km/h (199 mph)
Power-to-weight	412PS per tonne

ENGINE & POWERTRAIN

Engine configuration	V8 Twin Turbo / 3799cc
Power	540PS (533 bhp) @ 7,500 rpm
Torque	540Nm (398 lb ft) @ 3,500-6,500 rpm
Transmission	7 Speed SSG
CO₂	258 g/km
Economy	25.5 mpg (EU combined)
Engine lubricant	Mobil 1 New Life™ 0W-40

DIMENSIONS & WEIGHT

Dry weight	1,311 kg (2,890lbs) with lightweight options
Weight distribution (f / r)	42 / 58
Length	4,530mm
Width	2,095mm
Height	1,202mm

IN THE NEWS: McLaren Unveils Sub-$200K 570S Coupé Ahead of New York Auto Show

March 31, 2015 / moto+match / 0 Comments

McLaren has completed its three tier model strategy with the global reveal of the first in its Sports Series family: the McLaren 570S Coupé. This pure sports car, with driver optimised layout and electrifying performance, shares its DNA with the McLaren Super Series and Ultimate Series that sit above it in the range hierarchy. The Sports Series introduces McLaren race-derived technologies and design values to a new segment and audience.

Like every McLaren, the performance of the 570S Coupé is breathtaking. It combines, as its names suggests, a power output of 570PS (562bhp) with light weight construction to give a class leading power-to-weight ratio of 434PS per tonne. The 570S accelerates from 0 to 100km/h (62 mph) in 3.2 seconds, while 200 km/h (124 mph) is reached in just 9.5 seconds with the pace not letting up till the car reaches a top speed of 328 km/h (204mph).

The Coupé is the first bodystyle to be shown in the Sports Series, highlighting the latest evolution of the McLaren design philosophy. The ‘shrinkwrapped’, aerodynamically-optimised form will be seen in public for the first time at the 115^th New York International Auto Show. The McLaren design team has created a shape of beauty highlighted by details such as the rear flying buttresses that increase downforce as well as adding grace, and complex door tendons that direct additional air to cool the mid-mounted V8 engine.

The Sports Series features an evolution of the 3.8-litre V8 twin turbo engine, named M838TE, with 30 percent of components bespoke to the new model. Engineered by McLaren, it produces 570PS (562 bhp) at 7,400 rpm, and 600Nm (443 lb ft) of torque at 5,000-6,500 rpm. Power is delivered through a seven-speed SSG transmission, and transferred to the road through the rear wheels. This power is brought under control with standard-fit carbon ceramic brakes, fitted behind a newly designed range of forged alloy wheel options with P Zero™ Corsa tyres as standard from McLaren technical partner, Pirelli – 225/35/R19 on the front and 285/35/R20 on the rear.

The unique carbon fibre MonoCell II chassis has been newly designed with more of a focus on day-to-day usability, offering improved ingress and egress from the cabin. It is incredibly strong and stiff yet weighs less than 80kg, offering optimum levels of protection. This lightweight structure, and the use of aluminium body panels, contributes to a dry weight of as low as 1,313kg (2,895lbs), almost 150kg lighter than its closest competitor.

Minimised weight and a turbocharged engine doesn’t just bring great performance. The 570S also delivers excellent fuel efficiency and emissions for car that is also a member of the 200mph club, with fuel economy of 25.5mpg on the EU combined cycle, and emissions of 258g/km. For the US market, this means exemption from gas guzzler tax.

A PURE McLAREN BOTH ON ROAD AND TRACK

The 570S shows an evolution in the design direction for McLaren, with the McLaren ‘face’ seen on models in the Super Series and Ultimate Series sharpened further. This unique and striking appearance has been designed by air, with a bespoke aerodynamic package including aero blades below the front bumper giving a purposeful stance while channelling clean, cold air through the lower leading edge of the bodywork. Large ultra bright LED headlamps, fitted as standard to all Sports Series models, flank a sculpted bonnet which channels airflow over the front wheelarches. The intricately designed dihedral doors, a McLaren design signature since the iconic F1, possess a three dimensional form including a ‘floating’ door tendon which houses a discreet door button. This unique feature divides the airflow, channelling it into the side intakes and underneath the flying buttresses. This architectural structure ensures drag is minimised along the profile of the 570S, while also optimising levels of cooling and downforce.

Flying buttresses at the rear of the teardrop-shaped glasshouse form part of the aero package, directing air over the shoulderline of the 570S and across the rear deck aiding heat evacuation from the exposed engine bay and increasing downforce. Super-formed aluminium rear fenders ensure clean air is delivered to the fixed rear spoiler, again maximising downforce. The rear of the car is clean and uncluttered, with LED light blade rear lamps which follow the form of the sculpted panels. The rear of the vehicle features an aluminium mesh allowing effective heat evacuation as well as a view into the engine bay. This sits below a concave rear window, another signature Sports Series Coupé design cue. The twin exhausts exit below the rear bumper, either side of a newly designed and highly intricate rear diffuser.

The Sports Series has its own newly-developed suspension system ensuring enhanced levels of driver engagement and refinement on both road and track. It uses independent adaptive dampers with front and rear anti-rollbars – distinct from the Super Series – and dual wishbones, with the set up controlled by the familiar ‘Normal’, ‘Sport’ and ‘Track’ handling settings. In ‘Normal’ mode, the system provides a refined yet engaging ride, while the ‘Sport’ and ‘Track’ settings allow the 570S to become more track-focused when required.

THE MOST USABLE McLAREN TO DATE

Like every McLaren the cabin of the 570S has been designed around the driver, with a clear focus on engagement, visibility, functionality and more than any McLaren before it, day-to-day usability and space. As standard, the sports seats are leather upholstered – racing seats are optional – offering a high level of long distance comfort and support. The dashboard and steering wheel are also all leather trimmed. Intelligent and ergonomic design within the cabin provides extended stowage space, with the most usable space of any McLaren model to date. This adds to the 150 litres of storage in the front luggage bay.

The 570S is comprehensively equipped with a full infotainment system including an all new TFT digital instrument cluster that changes configuration according to driving mode, a seven-inch IRIS touchscreen, now with integrated climate control functionality, Bluetooth connectivity and DAB digital / SIRIUS satellite radio (depending on market), mounted on a ‘floating’ centre console. Despite the extensive specification list, weight-saving is still a key focus on the interior and the McLaren Audio four-speaker system ensures the optimal sound quality at the lowest possible weight.

With the Sports Series, an even greater variety of interior customisation is available with a variety of factory available Alcantara®, nappa leather and carbon fibre options. In addition, McLaren designers have created a range of ‘By McLaren’ bespoke interior specifications, similar to those also available on the 675LT, teaming carefully selected colours and materials designed to best showcase the stylish cabin space and co-ordinate with each exterior paint colour. In addition to this, a McLaren Audio Plus 8-Speaker Upgrade System and bespoke Bowers & Wilkins 12-Speaker Premium Audio System with 1280W surround sound upgrade is also available for the ultimate audio experience.

McLAREN 570S TECHNICAL STATISTICS

PERFORMANCE

0-100 km/h (0-62 mph)	3.2 seconds
0-200 km/h (0-124 mph)	9.5 seconds
Top speed	328 km/h (204 mph)
Power-to-weight	434PS per tonne

ENGINE & POWERTRAIN

Engine Configuration	V8 Twin Turbo / 3799cc
Power	570PS (562 bhp) @ 7,400 rpm
Torque	600Nm (443 lb ft) @ 5,000-6,500 rpm
Transmission	7 Speed SSG
CO₂	258 g/km
Economy	25.5 mpg (EU combined)

DIMENSIONS & WEIGHT

Dry weight	1,313 kg (2,895 lb) with lightweight options
Weight distribution	42 / 58
Length	4,530mm
Width	2,095mm
Height	1,202mm

AT THE SHOW: All-New Ford GT Unveiled at 2015 North American International Auto Show

January 12, 2015 / moto+match / 0 Comments

Ford today unveiled the all-new GT, an ultra-high-performance supercar that serves as a technology showcase for top EcoBoost^® performance, aerodynamics and lightweight carbon fiber construction.

The GT is one of more than 12 new Ford Performance vehicles coming by 2020. It joins Focus RS, F-150 Raptor, Shelby GT350 and Shelby GT350R in the growing Ford Performance lineup.

Beginning production late next year, the GT hits the road in select global markets to celebrate the 50th anniversary of Ford GT race cars placing 1-2-3 at the 1966 24 Hours of Le Mans.

“As we at Ford drive innovation into every part of our business, it’s worth remembering that our first innovation as a company was not in a laboratory, but on the racetrack,” said Mark Fields, Ford president and chief executive officer, referring to Henry Ford’s win of a 1901 car race that inspired financial backers to invest in his company. “We are passionate about innovation through performance and creating vehicles that make people’s hearts pound.”

The all-new GT supercar features rear-wheel drive, a mid-mounted engine, and a sleek, aerodynamic, two-door coupe body shell. It is propelled by the most powerful EcoBoost production engine ever – a next-generation twin-turbocharged EcoBoost V6 producing more than 600 horsepower.

The GT makes extensive use of lightweight materials, including carbon fiber and aluminum – enabling outstanding acceleration and handling with improved efficiency.

Ford’s commitment to and capability in delivering technologies typically offered only in elite vehicles is evident in the GT. These include advanced active aerodynamics, such as a deployable rear spoiler, and a host of material and technology innovations to help better serve the driver, such as SYNC^® 3 – the latest version of Ford’s advanced connectivity system.

“The GT is the ultimate execution of an enthusiast supercar,” said Raj Nair, Ford group vice president, Global Product Development. “GT includes innovations and technologies that can be applied broadly across Ford’s future product portfolio – another proof point that Ford continues raising the performance bar while ultimately improving vehicles for all of our customers.”

Carbon fiber innovation
Few innovations provide a more wide-ranging performance and efficiency advantage than reducing weight. All factors of a vehicle’s capabilities – acceleration, handling, braking, safety, efficiency – can improve through the use of advanced, lighter materials.

The all-new GT features advanced lightweight composites, which will help serve Ford’s entire product lineup moving forward. With the broad application of structural carbon fiber elements, the GT will exhibit one of the best power-to-weight ratios of any production car.

Anchored by a carbon fiber passenger cell, the GT features aluminum front and rear subframes encapsulated in structural carbon fiber body panels. Carbon fiber is one of the world’s strongest materials for its mass – enabling an ultra-stiff foundation for chassis components, while creating a lighter overall package for increased dynamic performance and efficiency.

Most powerful production EcoBoost ever
Ford EcoBoost technology is available in every new Ford car, utility and light-duty pickup in North America beginning this year.

EcoBoost engines power a growing number of Ford performance models, including the new Mustang, just-announced F-150 Raptor, as well as Fiesta ST and Focus ST.

Based on the same race-proven engine architecture serving Ford’s IMSA Daytona Prototype endurance racing efforts, the next-generation twin-turbocharged 3.5-liter EcoBoost V6 in the GT features a wide powerband with impressive time-to-torque characteristics.

The engine demonstrates remarkable efficiency – a key attribute of its endurance racing-derived powertrain, where exceptional performance combined with efficiency is a critical competitive advantage.

Ford’s twin-turbo EcoBoost V6 raced to three wins in its first season of the IMSA TUDOR United SportsCar Championship in 2014, including a win in the prestigious 12 Hours of Sebring, along with seven podiums over more than 15,000 endurance racing miles.

The GT features an all-new, port/direct dual fuel-injection setup to improve engine response, plus a low-friction roller-finger-follower valvetrain. The twin-turbocharged EcoBoost V6 will be paired with a seven-speed dual-clutch transaxle for near-instantaneous gear changes and exceptional driver control.

Aero innovation gets active
Aerodynamic efficiency is at the heart of the GT design, actively reducing drag while aiding downforce and stability.

From its optimum tear-drop shape to its aircraft-inspired fuselage and visibility-enhancing curved windshield, every slope and shape is designed to minimize drag and optimize downforce.

Although each surface on the GT is functionally crafted to manage airflow, it also features fully active aerodynamic components to improve braking, handling and stability.

An active rear spoiler is keyed to both speed and driver input, reactively deploying and adjusting its height and/or pitch angle depending on conditions.

Designed for purpose
While it shares a legacy with classic Ford racing and performance cars, GT is a fully contemporary and functional shape that communicates modernity and pure beauty.

The state-of-the-art chassis is suspended by an active racing-style torsion bar and pushrod suspension, with adjustable ride height. The 20-inch wheels are shod with Michelin Pilot Super Sport Cup 2 tires featuring a unique compound and structure designed specifically for the Ford GT. Multi-spoke wheels encircle carbon-ceramic brake discs at all four corners.

The narrow-profile canopy reduces frontal area and caps a purposeful interior that provides state-of-the-art technology to ensure control, comfort and safety. The two-seat cockpit is accessed by upward-swinging doors, and features driver and passenger seats integrated directly into the carbon fiber passenger cell.

This configuration significantly reduces seating hardware and weight, and provides a consistent and direct sensory connection to the chassis. The fixed seating is combined with adjustable pedals and steering column to accommodate a very wide range of driver statures.

An F1-style steering wheel integrates all necessary driver controls, creating a stalkless steering column that allows uncluttered access to the transmission paddle-shift controls. A fully digital and configurable instrument cluster provides a wealth of driver-focused data. The display is configurable for multiple driving environments and different driving modes.

“While we hope enthusiasts rejoice about this all-new GT, all Ford customers will benefit from the ultimate performance Ford and its new-generation innovations,” said Nair.

AT THE SHOW: Next Generation Acura NSX Unveiled

January 12, 2015 / moto+match / 0 Comments

Acura takes the wraps off its highly anticipated next-generation NSX supercar, designed to deliver a groundbreaking “New Sports eXperience”

Twenty-five years after the debut of the original, paradigm-shifting NSX supercar, Acura revealed the production version of its highly anticipated successor—the next-generation Acura NSX, developed and produced in the U.S.—to the world’s auto media at the 2015 North American International Auto Show today. The production model, in a scintillating NSX Red finish, took the stage with a growl from its twin-turbocharged engine.

The next generation NSX showcases the production styling, design and specifications of Acura’s mid-engine sports hybrid supercar, and Acura announced key details of the all-new vehicle’s design and performance. The company will begin accepting custom orders for the new NSX starting in the summer, with customer deliveries expected later in the year.

Specifically created to bring a “new sports experience” to the supercar segment, the NSX challenges conventional beliefs about supercars — much as the first generation did a quarter century ago. The approach is realized through an all-new power unit—a twin-turbocharged 75-degree DOHC V6 engine with a 9-speed dual clutch transmission (DCT) and three-electric motor Sport Hybrid system—integrated with an ultra-rigid and lightweight multi-material body with world’s-first material applications and manufacturing processes. Developed under the concept of a “human-centered supercar,” a car that puts the driver first in every aspect of its design, the next-generation NSX will leverage its state-of-the-art hybrid supercar power unit, body and chassis to deliver exceptionally intuitive and immediate response to driver inputs.

“Our commitment was to create an all-new NSX that is true to the heritage of NSX—a supercar that delivers a new driving experience, one where every part of the vehicle is respectful of the smartest part of the car, the driver,” said Mike Accavitti, senior vice president and general manager of the Acura division. “The soul of a car is the emotional connection it makes with the driver. With the NSX, that connection will be intense and immediate.”

As the pinnacle representation of Acura performance and prestige, the NSX was introduced at the auto show under the theme of “Precision Crafted Performance.” The theme was the original tagline for the Acura brand, a guiding force behind the development of the original NSX and a critical component of its launch.

The development of next-generation NSX, driven by precision crafted performance, has resulted in a clean-sheet design, which involved nearly three years of intensive development effort by a global design and engineering team led by engineers at the company’s development center in Raymond, Ohio.

“The NSX reflects Acura’s American roots and makes a powerful statement about the strong role being played by our North American operations in envisioning and building the future of Acura,” said Erik Berkman, executive vice president of the Acura Business Planning Office.

“Our global team embraced the challenge to create a new sports car experience, leveraging new technology to deliver incredibly vivid performance in a vehicle that responds intuitively and immediately to the will of the driver,” said Ted Klaus, chief engineer and global development leader of the new NSX. “The NSX delivers pinnacle supercar performance, with zero-delay acceleration and exhilarating, confidence-inspiring driving dynamics.”

Interwoven Dynamic Exterior Design
“The new NSX is a product of what we term ‘Interwoven Dynamic’ design,” said Michelle Christensen, NSX exterior design project leader. “It represents the ideal blending of exotic sports car form and supercar function.”

The NSX body features classic low and wide proportions married to modern and alluring surfacing, an aggressive front design, and tail lights that pays homage to the original NSX. The signature side intake and floating C-pillar collects air to feed the mid-mounted engine and directs airflow over the rear deck to increase downforce. To accommodate the new longitudinally mounted twin-turbo V6 and 9-speed DCT, the production vehicle was lengthened (+3 inches) and widened (+1 inch) with a slightly more cab-forward package, compared with the proportions of the NSX Concept shown in 2012.

Every element of the exterior body design has been carefully fashioned for total airflow management for both stability-enhancing downforce and vehicle systems cooling. The NSX has undergone extensive testing at the company’s state-of-the-art wind tunnel in Raymond, Ohio, leading to a number of significant changes from concept to final body design, including modified hood vents, new front fender vents, modified side air intakes, and an optimized deck spoiler.

Dimensions:

	NEW NSX	2013 NSX Concept	Diff (in.)	2005 NSX	Diff (in.)
Length	176 in. (4470 mm)	172.8 in. (4390mm)	+3.1	174.2 in. (4425 mm)	+1.8
Width	76.4 in. (1940 mm)	75.4 in (1915 mm)	+1.0	71.3 in. (1810 mm)	+5.1
Height	47.8 in. (1215 mm)	47.2 in. (1200 mm)	+0.6	46.1 in (1170 mm)	+1.8
Wheelbase	103.5 in. (2630 mm)	102.8 in. (2610 mm)	+0.8	99.6 in. (2350 mm)	+11.0
Front track	65.2 in. (1655 mm)	– –	– –	59.5 in. (1510 mm)	+5.7
Rear track	63.6 in. (1615 mm)	– –	– –	60.7 in. (1540 mm)	+3.0

Human Support Cockpit
“Consistent with the ‘human-centered supercar’ development concept, the NSX was designed from the inside out with an uncompromising focus on the driver,” said Johnathan Norman, NSX interior design project leader. “Like the original NSX, we created a ‘Human Support Cockpit’ that provides exceptional driver control, visibility and packaging, but further advanced to meet the extreme performance expectations of a modern supercar.”

The NSX interior boasts exceptional forward visibility, simple and intuitive controls, and class-leading ergonomics—most notably the seat, which features top-class holding performance with outstanding comfort and easy ingress/egress.

The NSX’s instrument cluster features a dynamic TFT display that responds to changes in the driver-selectable Integrated Dynamics System with pertinent graphics and information. The center console holds the Power button that readies the sport hybrid powertrain, nested in the center of the new Integrated Dynamics System dial control. Interwoven under the handcrafted leather dash panel is the exposed midframe—a functioning chassis structural member that reflects the design aesthetic of a naked sport bike. An ultra-thin, yet super strong A-pillar design and low-mounted instrument panel minimize obstructions to the driver’s view of the road.

Sport Hybrid Power Unit
In keeping with the foundational philosophy of the original NSX, the next-generation NSX is designed to provide a new sports car experience that maximizes the capabilities of the driver, delivering exceptionally intuitive and confidence-inspiring response “at the will of the driver.”

Acura engineers leveraged the company’s expertise both with high-performance engine and hybrid electric-drive technologies, as well as its two decades of experience with industry-leading dynamic torque-vectoring technologies, including Super-Handling All-Wheel Drive (SH-AWD), to create the most sophisticated, technologically advanced and intelligent powertrain in the supercar universe.

At the heart of the NSX’s performance capabilities is an all-new mid-mounted, 75-degree, DOHC V6 engine with twin turbochargers mated to an Acura-developed 9-speed DCT. The V6 engine employs a race-inspired compact valve train and dry sump lubrication system to help lower the center of gravity. The all-new 9-speed DCT delivers synapse-quick gear changes and rev-matching downshifts. The rear direct-drive electric motor, housed between the engine and transmission, supports acceleration, braking and transmission shifting performance. The NSX’s front wheels are driven by twin independent high-output electric motors which deliver instantaneous torque response and dynamic left-to-right torque distribution.

The NSX uses its front electric motors for dynamic torque vectoring in addition to enhancing acceleration and braking performance. The result is an instantaneous “zero delay” launch performance and handling response that seems to anticipate the driver’s desire. The NSX has undergone extensive testing at some of the world’s most challenging race circuits, including the famed Nurburgring.

Advanced Multi-Material Body
Also in keeping with the legacy of NSX—the world’s first all-aluminum supercar—the new NSX features an innovative new multi-material body design with world’s-first material applications and construction processes.

The NSX body utilizes a space frame design—an internal frame constructed of aluminum, ultra-high strength steel and other advanced materials. Anchored by a carbon fiber floor, torsional and bending forces are taken up entirely by this ultra-rigid structure which also utilizes advanced joining technologies.

The NSX features world’s-first casting technology that combines the design and manufacturing flexibility of a casting process with the strength and elongation properties of a forged material, enabling significant weight reduction. The body panels are composed of a combination of aluminum and sheet molding composite (SMC).

Advanced Sport Package
The NSX features an “Advanced Sports Package” with placement of key powertrain components –the mid-mounted engine, twin front motors and Sport Hybrid battery pack and power control unit – optimized to concentrate vehicle mass low and toward the center of the vehicle, to further enhance dynamic response. The combination of this packaging concept and the lightweight body give the NSX the lowest center of gravity in its class.

The NSX utilizes a fully independent, all-aluminum front and rear suspension and puts its considerable power down through ContiSportContact™ high-performance tires—245/35Z R19 front and 295/30Z R20 rear—mounted on 19×8.5 inch front and 20×11 inch rear aluminum alloy wheels. Powerful, natural and confident braking performance is provided by 6-piston front and 4-piston rear monoblock calipers squeezing ultra-high performance carbon-ceramic brake discs.

Handling is greatly enhanced by Sport Hybrid Super-Handling All Wheel Drive (Sport Hybrid SH-AWD), enabling lightning-quick response to all driver inputs—steering, braking and throttle—along with the stability, control and launch performance of all-wheel drive. Agile Handling Assist (AHA) uses the subtle application of brake torque to further enhance yaw response and dynamic stability.

The NSX’s dial-operated Integrated Dynamic System features Quiet, Sport, Sport+ and Track modes. The system adjusts engine, motor, transmission and chassis response, as well as the engine sound level, based on the needs of the driver and driving environment. Quiet mode enables electric-only driving at lower speeds for short durations. Dynamic vehicle responses become increasingly sharp as the driver moves from Sport to Sport+ mode and, finally, to Track mode, where the NSX reveals the full spectrum of its performance capabilities.

The NSX also features a “launch” function to achieve the ultimate in “zero delay” launch performance, aided by both the engine and three electric motors.

New Production Facility
The NSX will be manufactured exclusively at the Performance Manufacturing Center (PMC) in Marysville, Ohio, where approximately 100 highly-skilled associates will conduct full body construction, paint, and final assembly using domestic and globally-sourced parts.

The PMC and its processes have been developed to perfectly blend associate craftsmanship and technology in a new approach to manufacturing. By in-housing the body construction, Acura maintains complete control over total body quality, including critical strength, suspension accuracy, and fit and finish—from initial construction all the way to final assembly.

Associates will utilize innovative techniques to deliver next-generation craftsmanship and world-class quality in the realm of specialized, supercar vehicle production.

IN THE GARAGE: 2007 Porsche 911 Turbo Coupe

September 28, 2014 / moto+match / 0 Comments

photo 997Porsche007HDR_zpse9cc7ade.jpg


VIN	WP0AD29917S783821
Exterior	[L041] Black
Interior	[LE] Stone Grey Full Leather
Motor	3.6 L Turbocharged H4 rated at 480 bhp
Gearbox	[G975] 6-Speed Manual
Exterior Condition	Excellent (2+)
Interior Condition	Outstanding (1)
Drivetrain	Excellent (2+ )
Braking	Excellent (2)
Suspension/Ride	Excellent (2)
Tires/wheels	Very Good (3+)

THE EVERYDAY SUPERCAR. Porsche Turbo. For four decades, those two words have evoked breathtaking performance, meticulous engineering and an assertive, sometimes audacious sense of style that has never been equaled. While each generation of the 911 Turbo aimed to one-up the previous one, perhaps the greatest leap came with the 997 model Turbo in 2007. It not only sported impressive numbers like 480 hp and 505 lb-ft of torque (with the Sports Chrono package), but it was the way in which that performance was applied. Porsche’s new Variable Turbine Geometry all but eliminated turbo lag and back pressure, thus the powerband of the twin-turbo 3.6-litre motor was unlike anything before in a turbocharged performance car (peak torque 1,950-5,000 RPM), virtually equal to one that is normally aspirated. Mated to a pinpoint 6-speed gearbox—the last generation to feature a manual—and the 997 Turbo Coupe delivers an exhilarating, driver-oriented experience. The 911 Turbo presented here is well optioned to further enhance that, including:

Sports Chrono Plus
Adaptive sports seats
Full leather interior
Factory short shifter
Multi-function leather steering wheel

Massive Bridgestone Potenzas with very good tread (~75% remaining) surround the stock 19″ Turbo alloy wheels OR Gloss Black 19″ Tech Art Alloys. Combined with the Turbo Coupe’s standard adaptive AWD, 350mm inner-vented disc brakes with multi-piston monobloc calipers, and an alphabet soup’s worth of electronic driving aids, it makes for a incredibly civilized canyon carver or track-day darling.

OVERALL CONDITION
The first thing we notice about this 2007 Porsche 911 Turbo Coupe is the deep, brilliant shine of its all-original Black paint. It is near flawless and the pampering given by its two owners is evident in every detail. Likewise, the interior is showroom fresh. The full leather upholstery shows virtually no wear and is more indicative of a car with test-drive miles than one that’s been enjoyed for more than 60K. Again it’s a testament to the care it’s been given its entire life. Mechanically, it benefits from a fresh major service and is entirely free of leaks, smoke and unusual noises. Clutch and gearbox are taut with no signs of wear. The 997 Turbo’s electronic, variable-assisted steering is precise with no slop, while the stock suspension provides superb feedback, perfectly balancing the car’s blistering performance. The optional Tech Art wheels are flawless while the stock Turbo alloys show only one minor rash on one wheel. Both sets are shod with Bridgestone Potenzas, with very good tread on both (Turbo alloys ~75%; Tech Arts ~%70). This 911 Turbo Coupe truly is the best of both worlds. It presents like a garage queen, but fully recognizes—at its soul—that it is a Porsche and isn’t the least bit shy about being driven.

DRIVING IMPRESSIONS
In many ways, the Porsche 997 Turbo Coupe is the materialization of all things Porsche. It unmistakably carries the legacy of Ferdinand “Butzi” Porsche’s ideal of the “formally harmonious product” he envisioned when designing the 911, yet it is an awe-inspiring marvel of technology at the same time. The combination of its revolutionary Variable Turbine Geometry combined with a host of electronic driver aids like adaptive all-wheel-drive, Porsche Traction Management (PTM), Enhanced Porsche Stability Management (PSM), and Porsche Active Suspension Management (PASM), to name a few, made this the most drivable turbocharged performance car ever. It is brute power delivered through an unprecedented range. It invites the driver to explore its limits but can also keep itself perfectly in check, should the driver choose not to challenge their abilities. Porsche 911 Twin Turbo Coupe No. 3821 takes that even further with the added torques from its Sports Chrono Plus package, as well other driver-oriented options like Adaptive Sports Seats and a thicker, multi-function three-spoke steering wheel. Despite the technological brilliance of the PDK gearbox found in the 997.2 and 991, there is and never will be a substitute for the supple yet crisp shifts of its optional short shifter working through manual gears. It is neck-snappingly quick—3.7 seconds to 60 MPH and a top speed of 193 MPH—putting it within a car’s length of exotics like the Ferrari Enzo, Lamborghini Murcielago and McLaren MP4-12C. Yet it’s a car that is equally at home hauling bags of mulch with pygmy relatives in the back seats. Creature comforts like cold air conditioning, power windows and sunroof, and a full leather interior make for a pleasant cockpit. Ride is firm but not punishing, steering easy at lower speeds without losing road feel, and fuel economy is decent to boot. Maintenance costs are more akin to its Audi and Volkswagen cousins than the supercars it is compared to on spec sheets. It is a car that provides staggering performance in a real-world package. Formally harmonious, you might say.

photo 997Porsche006HDR_zps84b63972.jpg

photo 997Porsche0071024_zpsab31c1ba.jpg

photo 997Porsche0081024_zps1174cc6a.jpg

photo 997Porsche0101024_zps2815ea57.jpg

photo 997Porsche0131024_zps8bde40a8.jpg

photo 997Porsche0011024_zpsf794a931.jpg

photo 997Porsche0031024_zpsea63cf5c.jpg

photo 997Porsche0041024_zps50010759.jpg

photo 997Porsche0051024_zps9c001ec8.jpg

photo 99710081024_zps5e74c51d.jpg

photo 99710261024_zps090e8870.jpg

photo 6A_800_zps456e6019.jpg

photo Zw_800_zps1739cc60.jpg

photo 3g_800_zpsc9dd8bf1.jpg

photo 2Q_800_zpscede3c00.jpg

photo FQ_800_zpsc07445f2.jpg

photo SA_800_zps8bffdc43.jpg

photo 99710241024_zpsb0464ffd.jpg

photo 99710101024_zps97e6809c.jpg

photo jw_800_zps72b27323.jpg

photo pg_800_zps197334d3.jpg

photo Eg_800_zpsa73f6872.jpg

photo 99710141024_zpscaa5f5f9.jpg

photo 99710111024_zps5d9a8207.jpg

photo 997Porsche0111024_zpsca39dcd2.jpg

photo _581024_zps5b419c55.jpg

photo 9971046HDR_zps6d2ae732.jpg

photo _571024hdr_zps7416d538.jpg

photo 9971001HDR_zps3d5a0e99.jpg

photo 997Porsche0261024_zpsf4647435.jpg

photo Porschebooks0011024_zpsa05fed3f.jpg

photo 2007_911_Turbo_Torque_Curve-US1024_zps398f1fd3.jpg

IN THE NEWS: Bentley Announces 530-hp 811-lb.ft Mulsanne Speed

September 16, 2014 / moto+match / 0 Comments

(Crewe, 16^th September 2014) Bentley redefines the fastest ultra-luxury driving experience in the world with a new pinnacle flagship. The new Mulsanne Speed is tailored for the driver, with 537 PS (530 bhp / 395 kW), 1,100 Nm (811 lb.ft) and selectable sports suspension and steering on demand.

The reengineered powertrain, featuring Bentley’s mighty 6¾-litre twin-turbo V8, propels the Mulsanne Speed to 60 mph in 4.8 seconds (0‑100 km/h in 4.9 seconds) and on to a top speed of 190 mph (305 km/h). In modern Bentley tradition, the extra performance is matched by markedly improved efficiency; a 13% gain means a range extended by 50 miles (80 km).

New and contemporary styling features define the Mulsanne Speed as a statement in quintessential British luxury. On-board technology and connectivity are discreetly integrated beneath the finest materials, created with unrivalled craftsmanship and exquisite handcrafted details.

Chairman and Chief Executive of Bentley Motors, Wolfgang Dürheimer, comments:

“The new Mulsanne Speed is the car that defines Bentley, as a flagship for driving luxury performance. Our customers don’t compromise, and we’ve adopted the same approach in the design, engineering and crafting of our new flagship. The Mulsanne Speed is distinguished, calm and relaxing, but always with a connection to the road and relentless dynamic performance on demand. In this car, every journey becomes a drive.”

The Mulsanne Speed will be unveiled at the Paris Motor Show on Thursday 2nd October, and will be available for customer delivery this winter.

Torque pushed to record levels

At the heart of the Mulsanne Speed is Bentley’s iconic 6¾-litre twin-turbo V8 engine, which has been re-engineered for the Mulsanne Speed as well as the signature Mulsanne. A totally redesigned combustion system (including combustion chamber, inlet ports, fuel injectors, spark plugs, and compression ratio) promotes a much faster and more controlled combustion process. Through combining these advances with new variable valve timing and optimised turbocharger control, torque output of the engine has been pushed to record levels – 1,100 Nm (811 lb.ft) from 1,750 rpm.

The swell of torque from low engine speeds builds to a new peak power output of 537 PS, enough to drive the Mulsanne Speed to a top speed of 190 mph (305 km/h) – an unrivalled figure in the ultra-luxury sector. The 0‑60 mph sprint is covered in 4.8 seconds, with 0‑100 km/h taking just 4.9 seconds.

The new engine is paired with a recalibrated gearbox designed to enhance the driving experience of the Mulsanne Speed. The gear strategy is optimised for the new, higher wave of torque, and is designed for instant torque delivery on throttle application. The connection between the car and driver has been the focus, and extensive validation with both keen drivers and professional chauffeurs has proven the new setup. A new “S” mode gives the driver even more control, and maintains the engine speed above 2,000 rpm so that the turbochargers are always ready to deliver instantaneous performance.

An extensive recalibration of the engine management system has yielded benefits beyond increased torque and power. The cylinder deactivation system, that runs the engine as a V4 during light load, has been retuned for smoother transitions between V8 and V4 for even greater refinement. This work combines with a new gearbox control strategy and the engine hardware improvements to give a new level of efficiency for the Mulsanne engine.

Meeting the new EU6 emissions legislation, and designed to also meet the upcoming US LEV III standards in the future, the new powertrain records 342 g/km of CO₂ on the NEDC drive cycle – a 13% improvement on the current Mulsanne. The ensuing fuel economy improvements have extended the fuel range of the new Mulsanne Speed by 50 miles (80 km).

A Chassis System Tailored to the Driver

To deploy the effortless power and acceleration on offer in the Mulsanne Speed, an even more driver-focused Sport suspension mode is included. While the Bentley and Comfort suspension modes provide a comfort-focused and fully compliant chassis setup, the Sport mode stiffens the all-round air suspension for improved body control and adjusts the steering dynamics for greater feedback and accuracy. The driver can also choose to individually match steering, chassis and engine tunes according to personal preference through the Custom setting.

Through this new setup, the Mulsanne Speed builds on the abilities of the signature Mulsanne model, being able to switch from a communicative and enjoyable car to drive at pace, to a relaxing, comfortable and exceptionally refined limousine.

An assertive exterior

The Mulsanne Speed reflects its ground-breaking performance with new and more assertive styling features that are marks of distinction for Bentley’s pinnacle flagship.

A dark tint finish is applied to the exterior stainless steel matrix grilles, in a process unique in the automotive industry, with the radiator grille, lower bumper grilles and wing vents all featuring this exquisite treatment. The distinctive headlights of the Mulsanne show the same dark tint application, and at the rear of the car the taillights retain the “floating ellipse” design, but are similarly finished with a dark tint for a striking appearance, especially at night.

The Mulsanne Speed introduces Bentley’s first ever directional style wheel, with a design that is handed for the right or left side of the car. The 21″ wheels, available in painted, polished and dark tint with machined accent finishes, are individually machined from solid forged blanks, before being perfected by hand.

Twin rifled exhaust tailpipes are the finishing touch to the revised powertrain, while solid, polished stainless steel Speed badging adorns the front fender and door tread plate areas.

Four new exterior paint colours are introduced for the Mulsanne and Mulsanne Speed. These are:

Spectre: Seemingly black at first glance, heavy gold metallic and a hint of green result in a rich tone inspired by reptilian skin.
Candy Red: A rich and deep liquid red.
Camel: Reminiscent of golden sands, Camel has a bright metallic highlight with a butterscotch mid-tone.
Marlin: A rich blue with a hint of green, inspired by the shade of deep ocean waters and with a metallic shimmer.

The “standard” paint range covers 25 shades, including Marlin, while the optional extended range features over 100 colours. A fully bespoke paint-matching service is available on request.

A Cabin of Contemporary Luxury

The cabin of the Mulsanne Speed is a contemporary reinterpretation of the exquisite interior of the Bentley flagship. To create a modern two-tone feel, a new and unique colour split is available, with new stitch lines, that balances diamond quilted light-colour hide with darker, smooth hide. A new technical veneer option is available, with Piano Black veneer panels now including expertly handcrafted carbon fibre inlays. These new, contemporary panels have been especially developed for the Mulsanne Speed and match the rich, lustrous finish of the Piano Black veneer.

The Mulliner Driving Specification interior features are fitted as standard to the Mulsanne Speed, and includes:

Diamond quilted hide door panels and seats
Indented hide headlining
Embroidered Bentley emblems to all seats
A coined finish to interior door handles
Knurling to the sports gear lever and “organ stop” ventilation controls
Drilled alloy sports foot pedals

Customers choose from 24 different hide colours, in six different colour splits, and ten different veneers (seven as cost options) when specifying their Mulsanne Speed. Included in these ranges is a new hide colour, Camel (to match the new exterior paint of the same name) and a new veneer to the Mulsanne family, Tamo Ash.

Concealed Technology and Endless Customisation

Concealed beneath the exquisite materials that define the Mulsanne Speed cabin is a suite of technology to make any journey as productive or relaxing as one desires. A 60 GB on-board hard drive can store the driver’s collection of music and films. Electrically-operated tables, with recesses and connections for iPads and matching keyboards, can be fitted to the rear of the front seats, while on-board Wi-Fi through a dedicated router keeps the car connected to the outside world. A frosted glass bottle cooler, complete with bespoke crystal champagne flutes, may be installed behind the rear armrest. A 2,200 watt Naim for Bentley premium audio system expands on the standard 14-speaker system and offers the best in-car sound experience in the world. Entertainment on-the-move can be provided through the Rear Seat Entertainment system, including two 8” screens and Bluetooth headphones.

Signature Mulsanne updated for 2015

The signature Mulsanne ultra-luxury sedan has been updated for 2015, to complement the launch of the performance-focused Mulsanne Speed. The Mulsanne receives the same efficiency upgrade through new engine hardware, with its 512 PS (505 bhp), 1,020 Nm (752 lb.ft) 6¾-litre twin‑turbo V8 engine also now 13% more efficient. Changes have also been made to the gearbox calibration of the Mulsanne, focussing on smoother, relaxed gear changes that promote a comfortable and refined driving experience. New paint colours, hide and veneers options are also available across the Mulsanne family.

	Bentley Mulsanne Speed
Engine
Type	6.75-litre twin-turbocharged V8
Max Power	537 PS / 530 bhp / 395 kW @ 4,200 rpm
Max Torque	1,100 Nm / 811 lb.ft @ 1,750 rpm
Transmission
Type	ZF 8-speed automatic with Quickshift, Block Shifting and wheel-mounted paddleshift
Driveline	Rear wheel drive
Ratios	1^st: 4.71; 2^nd: 3.14; 3^rd: 2.10; 4^th:1.67; 5^th: 1.29; 6^th: 1.00; 7^th: 0.84; 8^th: 0.67
Final Drive	2.92
Brakes
Front	400 mm ventilated iron
Rear	370 mm ventilated iron
Wheels and Tyres
Wheels	9J x 21″
Tyres	265/40 ZR21
Steering
Type	Hydraulic rack and pinion with speed-dependant variable assistance
Turns lock-to-lock	3.3 turns
Turning circle	12.9 m / 42.3 feet
Suspension
Front	Double wishbone, anti-roll bar
Rear	Multilink rear suspension with toe and brake reaction control
Damping	Self-levelling air suspension with Continuous Damping Control, automatic ride height control and four driver-selectable modes

Dimensions
Wheelbase	3,266 mm / 128.6″
Overall length	5,575 mm / 219.5″
Width (across body)	1,926 mm / 75.8″ (width with mirrors folded)
Width (inc. mirrors)	2,208 mm / 86.9″
Overall height	1,521 mm / 59.9″
Fuel tank	96 litres / 21.1 gallons / 25.4 US gallons
Boot volume	443 litres / 15.64 cu. ft
Kerb weight (EU)	2,685 kg / 5,919 lb
Gross vehicle weight	3,200 kg / 7,055 lb
Performance
Top speed	190 mph / 305 km/h
0-60 mph	4.8 secs
0-100 km/h	4.9 secs
0-100 mph	11.1 secs
0-160 km/h	11 secs
Fuel Consumption (EU cycle)*
Urban	12.4 mpg (22.8 litres/100 km)
Extra Urban	28.4 mpg (9.9 litres/100 km)
Combined	19.3 mpg (14.6 litres/100 km)
CO₂ emissions	342 g/km
Fuel Consumption (EPA cycle)**
City (US mpg)	12
Highway (US mpg)	19
Combined (US mpg)	14
Emissions Controls	EU6 / LEV 11

* Fuel consumption figures are provisional and subject to Type Approval.
** Fuel consumption figures are provisional and subject to EPA certification.

IN THE NEWS: McLaren Releases First Images of the 650S Coupé Ahead of Geneva

February 17, 2014 / moto+match / 0 Comments

McLaren Automotive will return to the International Geneva Motor Show this year with its fastest, most engaging, best equipped and most beautiful series-production supercar yet.

The McLaren 650S joins the range as an additional model alongside the 12C and sold-out McLaren P1™, and learns from both models as well as 50 years of competing in the highest levels of motorsport. Available as a fixed-head coupé or as a Spider, with a retractable folding hard top, the McLaren 650S promises to redefine the high performance supercar segment, and has been designed and developed to provide the ultimate in driver engagement on the road and on the race track.

The 650S badge designation refers to the power output – 650PS (641 bhp) – of the unique British-built McLaren M838T twin turbo V8 engine. ‘S’ stands for ‘Sport’, underlining the focus and developments made to handling, transmission, drivability and engagement. Performance figures will be confirmed ahead of the Geneva Show but will improve on the already rapid 12C which continues on sale.

The design is inspired by the McLaren P1™, previewing a new family design language. The front bumper gives the McLaren 650S a dramatic, yet clean appearance and sits below new LED headlamps which reflect a similar look to the McLaren P1™. The more integrated front splitter contributes to increased levels of downforce, giving a greater level of steering feeling and confidence to the driver on turn-in, while also adding to the agility and the car’s handling balance. Unique door blades behind the front wheels direct air from the trailing edges of the front splitter, further benefiting front-end grip and vehicle balance.

The aerodynamic performance of the McLaren 650S is as efficient as the 12C, boasting the same drag coefficient figure, yet the air is being worked harder and more efficiently as it flows over, and through, the functional bodywork. At 150 mph, downforce levels are increased by 24 percent.

‘As always with McLaren, the new design is there for good engineering reasons,’ says McLaren Automotive CEO Mike Flewitt. ‘The newly designed front bumper improves downforce and steering turn-in. The high speed handling balance is now even better. The LED lights use less power and last longer.‘

Unique side intakes behind the dihedral doors feed large, efficiently packaged, radiators which help provide the cooling requirements of the mid-mounted, compact engine. A new design five-spoke lightweight forged ‘650S’ alloy wheel is unique to the model, and are fitted with Pirelli P Zero™ Corsa tyres to offer optimised roadholding, handling and driver feedback – the bespoke ‘MC1’ branded tyres have been developed alongside the McLaren 650S by McLaren technology partner Pirelli, and offer strong performance in normal road conditions and on track.

The McLaren 650S builds on experience from success on the track, and groundbreaking technologies fitted to other McLaren models. Active aerodynamics, which feature on both the 12C and McLaren P1™, have been further developed and honed to ensure the ultimate performance and ability for the McLaren 650S. The McLaren Airbrake, originally fitted to the 12C and 12C Spider and designed to offer optimised levels of downforce on the rear of the car, now operates with a greater level of functionality providing increased stability. The newly developed system means the Airbrake deploys whenever the car senses extra downforce is advisable – rather than simply under braking or when manually operated in ‘Aero’ mode. Below the Airbrake, a distinctive rear three-piece bumper, similar to the GT3 racing version of the 12C, compliments the aerodynamic shaping of the McLaren 650S.

The pioneering ProActive Chassis Control (PCC) suspension system, developed by McLaren, has been further enhanced for the McLaren 650S. A feature of the system is the ability to adjust the ride and handling modes – Normal / Sport / Track – in isolation from the drivetrain, which gives complete freedom in terms of ride and handling. These settings, for both powertrain and suspension, have been recalibrated to improve driver engagement. The updates are especially noticeable in Sport mode.

‘McLaren is a fast moving company, continually striving for improvements and technical advantages. We are always seeking to innovate, to be the class leaders, to bring new technologies and thinking to market. That’s our Formula 1 heritage shining through,’ explains Mike Flewitt. ‘Everything we’ve learnt from the 12C and the McLaren P1™ has gone into the design and development of the McLaren 650S.’

The McLaren 650S is designed to be the best and most engaging driver’s car in its class, yet it is not a stripped out road racer. Ride comfort and refinement are to executive saloon standards. The McLaren 650S models are equipped with IRIS satellite navigation with Bluetooth telephony, DAB digital radio (SIRIUS satellite radio in North America), wireless tethering, audio streaming and voice control as standard, while also offering enhanced levels of optional specification than previously offered. Options include fixed-back carbon racing seats, based on the lightweight design found in the McLaren P1™, an electric steering column adjustment assisting ingress and egress, a rear parking camera and extended carbon fibre throughout the interior.

The global reveal of the McLaren 650S Coupé and Spider will take place on Stand 1240, Hall 1 at 12.00CET (11.00GMT) on Tuesday, 4 March 2014 at the 84th International Geneva Motor Show.